Wattstopper
®
DLM Wireless IR Configuration Tool with USB
Outil de commande IR sans fil DLM avec USB
Herramienta de puesta en servicio inalámbrica por infrarrojos DLM con USB
Quick Start Guide • Guide de démarrage rapide • Guía de inicio rápido
No: 25790 – 08/17 rev. 2
Catalog Number • Numéro de Catalogue • Número de Catálogo: LMCT-100-2
Country of Origin: Made in China • Pays d’origine: Fabriqué en Chine • País de origen: Hecho en China
LMCT-100-2-U is BAA and TAA compliant (Product produced in the U.S.)
BATTERIES
The LMCT-100-2 operates on
three standard 1.5V AAA Alkaline
batteries or three rechargeable
AAA NiMH batteries.
The battery status displays in
the upper right corner of the
display. Three bars next to BAT=
indicates a full battery charge. A
warning appears on the display
when the battery level falls below
a minimum acceptable level.
To conserve battery power, the
LMCT-100-2 automatically shuts
off 10 minutes after the last key
press.
DESCRIPTION AND OPERATION
The LMCT-100-2 Digital Configuration Tool is a handheld tool for setup and testing of Wattstopper Digital Lighting Management (DLM)
devices. It provides wireless access to occupancy and daylighting sensors for setup and parameter changes, Wattstopper
Push n’ Learn™ (PnL) technology for load configuration, switch and dimmer assignment and operating parameter changes. The
LMCT-100-2’s display shows menus and prompts to lead you through each process. The navigation pad provides a familiar way to
navigate through the customization fields. The LMCT-100-2 allows modification of the system without requiring ladders or tools and can
be done simply with a touch of a few buttons.
The LMCT-100-2’s IR transceiver allows bidirectional communication between DLM devices and the LMCT-100-2. Simple menu screens
let you see the current status of the system and make changes. It can change any of the DLM occupancy sensor parameters such as
sensitivity, time delay and more. With the LMCT-100 you can also change load configurations, without any new wiring. The LMCT-100-2
can change dimming system options such as scene assignments, fade rates and other options not available through the standard user
interface. Additionally, the LMCT-100-2 can be used for initial configuration of the LML-400, LMLS-500, and LMS-600 daylight sensors.
For a detailed explanation of all the screens in the LMCT-100, see the LMCT-100-2 User Guide, which can be downloaded from from
the Wattstopper/Legrand website: http://www.legrand.us/wattstopper/digital-lighting-management/configuration-controls/lmct-100.aspx.
The LMCT-100-2 has a micro-USB port (found in the battery compartment when you remove the battery cover). This port is used to update
the firmware in the LMCT-100-2, when updates are made available. Details on updating can be found in the LMCT-100-2 User Guide.
NOTE: The micro USB port is only found on the LMCT-100-2, and not on the original LMCT-100.
Product Version Comparison LMCT-100 LMCT-100-2
Date DLM products last updated March 1, 2016 May 1, 2017 (as of date of this doc, but future updates possible)
Firmware Upgradeable No Yes, via USB
Wireless Type Infrared Infrared
NAVIGATION
You navigate from one field
to another using (up)
or (down) arrow keys.
The active field is indicated
by flashing (alternates
between yellow text on black
background and black text
on yellow background).
Once active, use the Select
button to move to a menu
or function within the active
field.
Value fields are used to
adjust parameter settings. They are shown in “less-than/greater-
than” symbols: <value>. Once active, change them using (left) and
(right) arrow keys. The left key decrements and the right key
increments a value. Selections wrap-around if you continue to press
the key beyond maximum or minimum values. Moving away from the
value field (using / keys) overwrites the original value. The
(Home) button takes you to the main menu. The (Back) button
can be thought of as an undo function. It takes you back one screen.
Changes that were in process prior to pressing the button are lost.
Home Menu
The Home (or Main) menu displays after the powerup process
completes. It contains information on the battery status and six menu
choices. Press up/down buttons to locate the desired function then
press Select.
Sensor Configuration
Load Config (PnL)
Daylighting Config
Button Configuration
Dimming Configuration
More
Home/
Main Menu
Up
Select
Right/Next
Left
Back
Power
On/Off
BAT=
To Next Page
Need help?
General
