LEHR LP2.5 HP - Engine Technical Specifications

LEHR LP2.5 HP Rev.A 2013
4
General Specications
Dimension
Overall length
Overall width
Overall height
Boat transom height
Weight
Performance
Maximum output
Full throttle operating range
Fuel consumption
At 4000 RPM
At 3000 RPM
Power Unit
Type
Cylinder quantity
Displacement
Bore x Stroke
Compression ratio
Control System
Starting System
Ignition control system
Ignition timing
Spark plug
Cooling system
Exhaust system
Lubrication System
623 mm (24.5 in)
345 mm (13.6 in)
1,021 mm (40.2 in)
381mm (15.0in)
17.2 kg (37.9 lb)
1.8 kW (2.5 hp) at 5,000 r/min
4,000 - 5,000 r/min
(0.24 gal/hr)
(0.10 gal/hr)
4-Stroke, single cylinder, OHV
1
72 cu. cm (4.4 cu. in)
54.0 mm X 31.5 mm (2.13 in X 1.24 in)
9.3
Tiller control
Manual starter
Ignition Coil
MaxAdvance30DegreesBTDC
BR6HS (NGK)
Water
Under water
Splash
Item Model LP 2.5 S
1