Need help?Do you have a question about the Leica Geosystems DISTO E7100i and is the answer not in the manual?
General| Accuracy | ± 1.0 mm |
|---|---|
| Laser Class | 2 |
| Display | Backlit LCD |
| Connectivity | Bluetooth |
| Units | m, ft, in |
| Tilt sensor | Yes |
| Protection class | IP54 |
| Laser Type | 635 nm, < 1 mW |
| Battery Life | Up to 5000 measurements |
| Operating Temperature | -10 °C to +50 °C |
| Measuring accuracy | ± 1.0 mm |
| Battery Type | 2 x AAA |
Guide on how to switch the device on and off, including continuous laser mode.
Step-by-step instructions for measuring a single distance.
Guidance on using the continuous measurement mode.
Procedure for calculating the area of a surface using the device.
Information on using Bluetooth Smart for data transfer with apps.
Defines acceptable usage and lists prohibited actions to ensure safety.
Warnings regarding potential hazards from erroneous measurements, misuse, or damage.
Details on the device's laser class and safety recommendations for laser beams.
To Next Page
