What to do if Leica Geosystems Laser Level Rugby does not turn on?
If your Leica Geosystems Laser Level Rugby does not turn on, the batteries may be low or dead. You should check the batteries and change or charge them if necessary.
Why is the laser distance reduced on my Leica Geosystems Laser Level?
The distance of the laser may be reduced because dirt is reducing the laser output. Clean the windows of the Rugby and the receiver.
What to do if Leica Geosystems Laser Level receiver is not working properly?
If the laser receiver is not working properly, it might be due to several reasons: * The Rugby is not rotating because it may be levelling or in Elevation Alert. Check for proper operation of the Rugby. * The receiver is out of usable range. Move closer to the Rugby. * The batteries of the receiver are low. Replace the receiver batteries.
How to enable Elevation Alert function on Leica Geosystems Laser Level?
To enable or disable the Elevation Alert function, with your Rugby turned on and rotating, press and hold the Left hidden button and the Right hidden button. Then, press the Centre hidden button. The Rugby will beep once to indicate the change.
General| Type | Rotary Laser Level |
|---|---|
| Self-Leveling | Yes |
| Self-Leveling Range | ± 5° |
| Laser Class | Class 2 |
| Laser Diode | 635 nm |
| Rotation Speed | 600 RPM |
| Laser Type | Red Laser |
| Operating Temperature | -10°C to +50°C (14° to 122°F) |
Congratulates the user on purchasing a Leica Rotating Laser product.
The type and serial number of your product are indicated on the type plate.
Lists available documentation such as the Quick Guide and User Manual.
Directions to anticipate and avoid operational hazards for users and responsible persons.
Explains the importance of warning messages for safety and hazard awareness.
Details the intended use and reasonably foreseeable misuse of the product.
Specifies suitable environments and conditions for product operation.
Outlines duties of the manufacturer and the person responsible for the product.
Warns about potential hazards like electrocution, lightning, and mechanical stress.
Explains laser classification (Class 2) and safety precautions for laser beam exposure.
Discusses EMC, potential disturbances, and precautions for using accessories.
Addresses potential interference and hazards when using devices near the product.
Provides FCC compliance information for digital devices and radio frequency energy.
Describes the Rugby 610 as a laser tool for construction and levelling.
Identifies the main components of the Rugby laser unit.
Lists the items found within the product's carrying case.
Provides instructions for setting up the Rugby on a tripod and choosing a location.
Identifies and describes the functions of the Rugby's power and hidden buttons.
Explains the main functions of the LED indicators and their meanings.
Details the procedure for powering the Rugby on and off and initial leveling.
Describes the default operating mode and its self-levelling function.
Explains how to switch to and use Manual Mode for slopes.
Details the function that prevents incorrect work due to elevation changes.
Identifies and describes the instrument components of the Rod Eye 140 receiver.
Explains how to access and navigate the menu for the Rod Eye 140 receiver.
Identifies and describes the instrument components of the Rod Eye Basic receiver.
Provides a step-by-step guide for setting forms using the receiver.
Offers a step-by-step guide for checking grades using the receiver.
Details the process of manual grading using the Rugby and slope adapter.
Explains the operating principles for charging and initial use of batteries.
Describes how to charge the rechargeable Li-Ion battery pack for the Rugby.
Provides a step-by-step guide for changing the Li-Ion battery pack.
Provides a step-by-step guide for changing alkaline batteries.
Details the procedure for checking the level accuracy of the Rugby.
Explains how to enter, adjust (X/Y axes), and exit the accuracy adjustment mode.
Lists common alerts, their symptoms, and possible causes/solutions.
Addresses common problems like the Rugby not turning on or reduced laser distance.
Provides guidelines for transporting the equipment in the field, vehicles, and during shipping.
Details recommended storage conditions for the product and batteries.
Explains how to clean and dry the product, accessories, and cables.
Declares compliance with essential requirements of applicable European Directives.
Lists key technical specifications like operating range, accuracy, and rotation speed.
Details operating/storage temperatures, protection ratings, and battery/charger specs.
Provides technical specifications for the Li-Ion charger.
Provides technical specifications for the Li-Ion battery pack.
Describes warranty coverage for the entire usage time of the product.
Outlines the guaranteed service period and registration requirements.
Lists and describes power supply accessories for the Rugby.
To Next Page
