Leica Geosystems Viva CS15 User Manual

1
Connecting Viva controller to Ohmex Echo Sounders
CS10/CS15 Settings

Leica Geosystems Viva CS15 Specifications

General

Brand	Leica Geosystems
Model	Viva CS15
Category	Controller
Language	English

Summary

Connecting Viva Controller to Echo Sounders

Introduction to CS10/CS15 Settings

Overview of connecting Leica Viva CS10/CS15 controllers to Ohmex Echo Sounders via serial cable or Bluetooth.

Initial Setup and Connection Type Selection

Steps to switch on the controller, navigate to the main screen, and select 'Instrument' settings.

Selecting Instrument Connections

Procedure to choose 'Instrument connections' from the controller menu.

Choosing 'All Other Connections'

Navigating to and selecting 'All other connections' within the instrument settings.

Configuring ASCII Input Settings

Highlighting 'ASCII Input' and accessing the 'Edit' function for configuration.

Setting Up RS232 Port and Device

Enabling ASCII data reception and selecting 'CS RS232 Port' for the connection.

Adding and Configuring RS232 Device

Navigating to 'Others', selecting 'RS232', and initiating the creation of a new device.

Configuring New Device Parameters

Creating a device name (e.g., 'Sonarlite') and setting the baud rate.

Confirming New Device Setup

Finalizing the addition of the new device by pressing 'OK'.

Finalizing Message and Bluetooth Settings

Setting 'End of message' to 'CR/LF' and options for Bluetooth connection.

Annotation Settings for ASCII Data

Navigating to 'Annotation 1' and enabling 'Store ASCII data'.

Finalizing Message Description

Entering a description for the message and saving the settings.