Need help?Do you have a question about the Leica Disto E7100i and is the answer not in the manual?
General| Accuracy | ± 1.0 mm |
|---|---|
| Laser Class | Class 2 |
| Battery Type | 2 x AAA |
| Connectivity | Bluetooth |
| Units | m, ft, in |
| Protection Class | IP54 |
| Laser Type | 635 nm, < 1 mW |
| Battery Life | Up to 5000 measurements |
| Operating Temperature | -10 to 50 °C |
| Display | LCD |
| Weight | 0.1 kg |
General safety instructions and user responsibility for safe operation.
Diagram and labels of the Leica DISTO E7500i device components.
Explanation of the main display screen elements during measurements.
Overview of the device's selection screen layout and functions.
Details on the Pointfinder viewscreen elements like zoom and crosshair.
Instructions on how to properly insert batteries into the device.
Step-by-step guide for powering the device on and off.
How to undo the last action or clear the current function.
Explains how to interpret and respond to device messages.
Description of the endpiece and its automatic orientation detection.
How to perform continuous or min/max distance measurements.
Procedure for adding or subtracting measurements for area/volume.
Guidance on using the Pointfinder for outdoor measurements and parallax.
List of available settings and configuration options.
How to select and set the desired tilt measurement units.
How to select and set the desired distance measurement units.
Instructions for enabling or disabling audible beeps.
Instructions for enabling or disabling the digital level feature.
How to activate or deactivate the keypad lock function.
Procedure for unlocking the device keypad.
How to assign frequently used functions to favorite keys.
How to adjust the display brightness for better visibility.
Steps to enable or disable the Bluetooth Smart connection.
Detailed procedure for calibrating the tilt sensor for accurate measurements.
How to reset the device to factory settings.
How to set an offset value for measurements.
List of all available measurement and calculation functions.
How to use the device as a timer with selectable release times.
How to perform calculations using the device's built-in calculator.
How to set the measurement reference point (rear, front, tripod).
How to store and recall measurements.
Step-by-step guide for performing a basic distance measurement.
How to measure horizontal distances using tilt angle compensation.
Measuring height differences relative to a reference point.
How to calculate area by measuring two lengths.
How to calculate volume by measuring three lengths.
How to calculate the area of a triangle using three measurements.
Using long range mode for difficult targets or conditions.
How inclination is permanently displayed and its uses.
Measuring indirect distances and heights of sloped objects.
Measuring heights of buildings or trees automatically.
How to calculate the area of a trapezium.
How to mark out defined lengths on a surface.
Using two measurements to calculate a third side of a right triangle.
Using three measurements to calculate a third side of a right triangle.
Detailed specifications for distance measurement accuracy and range.
Specifications related to tilt measurement accuracy.
Includes laser class, protection, battery life, dimensions, and weight.
A list of all functions supported by the device.
Table detailing error messages, their causes, and corrective actions.
Defines responsibilities of manufacturer and user for safe operation.
Outlines acceptable uses for the device according to safety guidelines.
Lists actions and conditions that are unsafe or prohibited.
Warnings about potential hazards and erroneous measurements.
Specifies environmental and operational limits for safe use.
Instructions for the safe and environmentally sound disposal of the product.
Information regarding the device's electromagnetic compatibility.
FCC compliance statement for the device in the US.
Safety precautions regarding Bluetooth usage and electromagnetic radiation.
Details on the laser class and safety warnings for laser beam exposure.
Explanation of safety labels and symbols on the device.
To Next Page
