Need help?Do you have a question about the Leica iCON excavate iCP41 and is the answer not in the manual?
General| RAM | 4 GB |
|---|---|
| Storage | 64 GB SSD |
| Operating System | Windows 10 IoT Enterprise |
| IP Rating | IP65 |
| Touchscreen | Yes |
| Connectivity | Wi-Fi, Bluetooth, USB, Ethernet |
Provides safety warnings and precautions for installing the product on machinery.
Details how to set the desired offset in single slope mode when not using a laser.
Basic operation instructions for using laser in single slope mode.
Describes how to turn dual slope mode on/off and adjust Y/X slopes.
Introduces the process of calibrating the bucket sensor for the system.
Explains how to quickly change between 10 different operational settings.
Explains how to use the diagnose tool to view sensor status and errors.
Details how to store points and create coordinate files for job data.
Explains how to use the auto logging feature for data collection.
Defines avoidance zones and their characteristics to prevent entry.
Explains how to recalibrate rotation when it becomes unusable due to machine movement.
Explains how this function moves the reference model vertically.
Two ways to hold a cross slope: from centre line or user-defined.
Two ways to hold slope when working with MBS models.
How to switch between single and dual GPS using the PowerBox.
How to set up localisation using SBG LOK format or predefined systems.
Comprehensive tool for searching and locking prisms with a Leica TPS.
Overview of supported search methods for different Leica TPS models.
Function for excluding stationary targets from locking.
Setting up connection between TPS and iCON 3D via Bluetooth/Radio.
Warnings and precautions regarding installation, modifications, and moving components.
Explains EMC and potential disturbances to other equipment.
FCC compliance for Class B digital device and interference measures.
Details instrument ports, dimensions, weight, and power.
To Next Page
