RECORDING VIDEO ▸ ISO SENSITIVITY
261
DYNAMIC ISO SETTING
The thumbwheel and right setting dial can be configured to allow
manual ISO settings in real time. That is the factory setting in the
operating modes S, A and M. Turning the dial will cycle through all
setting values available in the ISO menu. That means that Auto ISO
can also be selected.
FLOATING ISO
This function complements Auto ISO. Light strength changes with
many zoom lenses when the focal length is changed. Floating ISO
will in this situation adjust the sensitivity in fine graduations and will
simultaneously ensure that the selected settings of aperture value
and shutter speed remain constant in (semi) automatic exposure
modes. This will specifically in video shootings prevent visible
jumps in brightness.
Factory setting: On
▸ Select Floating ISO in the main menu
▸ Select On
Notes
• Floating ISO can work only if the original ISO setting allows scope
for change, i.e. the highest/lowest ISO setting is not already
being used. The Floating ISO warning icon will be displayed in that
case.
• This function is not available in Cine mode.
To Next Page
Loading...
