Leister Triac PID - Page 4

• Use only LEISTER accessories.
• Clean polluted air filter (5) with a small brush or replace it.
• Clean welding nozzle or draw nozzle with a steel brush.
• Check power supply cord (1) and plug for electrical and mechanical damage.
• The motor switches off automatically when the brushes reach their minimum
length. Have the tool checked by your Service Centre. The life of the brushes is
about 1600 running hours of the welding tool’s motor.
• Repairs should be carried out by authorised LEISTER Service Centres only. They
guarantee a specialised and reliable Repair Service within 24 hours using original
spare parts according to schematics and spare parts lists.
• Guarantee and liability are in accordance with the guarantee certificate as well
as with the currently valid general business and sales conditions.
• LEISTER Process Technologies rejects any guarantee claims for tools which are not
in their original condition. The tools must never be altered or changed.
Technical data and specifications are subject to change without prior notice.
Your authorised Service Centre is:
GUARANTEE AND LIABILITY
SERVICE AND REPAIRS
MAINTENANCE
ACCESSORIES
VERSIONS
4
BA Triac PID/06.2004
Heater tube with
cooled protection
tube for LEISTER
push-fit nozzles
Heater tube with
cooled protection
tube for LEISTER
screw-on nozzles
®
LEISTER Process Technologies, Riedstrasse, CH-6060 Sarnen/Switzerland
Tel. +41 41 662 74 74 Fax +41 41 662 74 16 www.leister.com sales@leister.com