Need help?Do you have a question about the Leisure bay B Series and is the answer not in the manual?
General| Shell Material | Acrylic |
|---|---|
| Voltage | 240V |
| Heater | 4kW |
| Lighting | LED |
| Cabinet Material | synthetic |
Emphasizes the importance of reading and following all provided instructions for safe spa operation.
Advises against unsupervised use by children and recommends protective covers.
Details the mandatory G.F.C.I. testing procedure and its function for electrical safety.
Warns about potential injury risks from cord-connected units, G.F.C.I. issues, and suction fittings.
Specifies electrical supply requirements for permanently installed C Series units, including G.F.C.I.
Highlights the danger of accidental drowning, especially for children, and the need for supervision.
Warns about potential entrapment risks with suction fittings and the importance of compatible replacement parts.
Details electrical shock risks related to proximity of metal surfaces and grounding requirements.
Warns against placing electric appliances like lights or radios near the spa to prevent shock hazards.
Provides warnings regarding water temperature, alcohol, drugs, medication, and medical conditions.
Stresses the critical importance of permanently placing the provided warning sign in a visible location.
Advises constant supervision by another person when the spa is in use for safety assistance.
Details safe water temperature ranges (100-104°F) and recommends using a thermometer.
Warns that prolonged exposure to hot water can cause heat stroke, which can be fatal.
Explains hyperthermia, its symptoms, and the dangers of prolonged immersion in hot water.
Warns that alcohol, drugs, or medication can increase the risk of hyperthermia and drowning.
Advises immediate replacement of broken or missing drain covers to prevent entrapment.
States that all electrical installation and connection to the power source must be by a certified electrician.
Details foundation requirements, specifying a minimum load bearing capacity of 135 lbs/sq ft.
States that C-2 and C-2X 240 volt system wiring must be completed by a Certified Licensed Electrician.
Explains the National Electrical Code requirement for G.F.C.I. protection in connections.
Reinforces the NEC requirement for G.F.C.I. and a disconnect switch for 240 volt spa circuits.
Specifies the need for an isolated, dedicated 240 volt, 30 or 50 amp circuit for C-2/C-2X operation.
To Next Page