Need help?Do you have a question about the Leitch 6800 Series and is the answer not in the manual?
Explains manual and automatic equalization adjustment methods for the AES-6880.
Details how the AES-6880 monitors and reports incoming data errors via LEDs and alarms.
Illustrates small, mid-size, and large network configurations for the DNH-6800 module.
Explains how to adjust gain and high-frequency response of the VDA-6830 module.
Lists performance metrics for VEA-6840: gain range and frequency response.
Specifies equalization ranges and response characteristics for the VEA-6840.
Details VPD-6830-CLP functionality: luminance and hard white clip.
Lists technical specifications for VPD-6830-CLP: input, output, performance.
Explains VPD-6830-XEQ functionality for compensating long cable runs.
Details technical specifications for VPD-6830-XEQ: input, output, performance.
Lists technical specifications for VPD-6830-DEQ: input, output, performance.
Explains VSE-6801 operation: jumper settings and LED indicators.
Details input/output specifications and operational parameters of the VSE-6802.
Lists specifications for the serial video outputs of the VSD-6801 module.
Details video input specifications for the VSR-4041 module.
Covers VSR-4041 installation into frames and the use of back modules.
Provides detailed instructions for adjusting the VSR-4041 for stable picture and sync.
General| Manufacturer | Leitch |
|---|---|
| Series | 6800 |
| Control | Ethernet |
| Protocols Supported | Ethernet |
| Power Supply | Redundant Power Supplies Available |
To Next Page
