Leitch DPS-575 - Chapter 9: Menus: DV Control

Chapter 9:
Menus: DV Control
CHAPTER 9: MENUS: DV CONTROL
On units with the DV I/O Module installed, selecting DV Control from the Main
Menu puts the unit into DV Control Mode. In DV Control Mode, transport control of
a DV device (such as a deck or camcorder) connected to the DPS-475/575 by IEEE-
1394 (Firewire) can be done from the front panel.
When DV Control is selected, the display will change to show the current time code
of the DV device, as well as the transport status (play, stop, etc.). While in DV mode,
the normal functionality of the front panel controls is replaced by DV device control.
On the front panel of the unit, standard representations of transport controls appear
below many of the buttons. The buttons used for DV device control are as follows:
Key Function
Luma Stop
Black Rewind/Scrub Backward
Chroma Play
Hue Fast-Forward/Scrub Forward
Memory Record (used in conjunction with Play)
Option Pause
Default Toggle the control knob between Jog mode and
Shuttle mode
The control knob functions as a jog or shuttle controller, depending on the currently
selected mode.
To exit DV Control Mode and return to normal operation, press the Exit key.
67