© Leitner 2020
Installing the joystick on left hand side armrest
The wheelchair is setup by default to have the joystick installed on the right hand side. It is
possible to install the joystick on the left hand side armrest. In short, remove the wire,
install the wire on the left side and install the console in the same way as on the right side.
Please follow the instructions below.
Unscrew the knob (K) by hand from the right armrest and screw it into the same socket on the
left armrest. Use a screwdriver to remove the screw (arrow) witch holds the black cable latch
(L) on the right armrest.
K
L
To Next Page
Loading...
