© Leitner 2020
Charging the batteries
To charge both batteries on the wheelchair,
connect the big round silver 3-prong
connector to the inlet on the underside of
the joystick console, then connect the
charger to the power point (AC 110-220 V,
50-60 Hz).
The batteries can also be charged individually
by connecting the charger directly to the
battery.
Warning: the charger may get very hot. Always keep charger away from any materials which can catch
fire. The charger is intelligent and will stop charging once the battery is full. Red light on charger:
charging. Green light on charger: fully charged (or not connected).
Warning: always switch wheelchair power OFF before charging batteries.
To Next Page
Loading...
