LEITZ ERGO COSY - Product Overview and Components; Product Components; Safety and Setup; General Safety Warnings

2
ENEN
Thank you for choosing Leitz Ergo Cosy
This product is a fully assembled ergonomic standing desk converter. It gives you the exibility to
switch between a sitting or standing posture while working at the o󰀩ce or at home. The product
provides enough space for a monitor and a laptop.
Product overview
1
5
4
3
2
350
700
1. Tabletop
2. Lever
3. Feet
4. Castors
5. Lifting mechanism
Safety information
CAUTION
Read and understand these instructions,
including the technical specications. This
product is designed to be used as a standing
desk converter in an o󰀩ce or home
environment. This product is not replacing a
desk. Keep all safety information and
instructions for future reference. The
manufacturer is not liable for cases of material
damage or personal injury caused by incorrect
handling or use. The product is intended for
use indoors. Do not exceed the maximum
loading capacity. Do not lean or stand on the
product. Do not eat or drink while using this
product. Be wary of cables that can create
tripping hazards. Keep the product away from
liquid, humidity or moisture. Do not attempt to
open, modify or repair the product. Repairs or
work on the lifting mechanism shall only be
carried out by trained and qualied personnel.
Do not use wipes or chemicals as these could
damage the working surfaces and lifting
mechanism. Wipe with a clean, damp cloth.
Set-up
1. Place the product on a clean and even
surface. Make sure the feet ③ are fully
placed on the surface and do not stick
out.
2. Turn the castors ④ on the feet to level
the product.