Need help?Do you have a question about the Lekker Bikes E-AMSTERDAM 2ND GEN and is the answer not in the manual?
Check bike condition upon arrival and carefully remove it from packaging.
List of necessary tools and materials for bike assembly.
Adjusting handlebar position and angle using a 4mm Allen key.
Setting brake levers and gear shifter to a comfortable position.
Correctly installing pedals with grease and tightening to 40-42Nm.
Aligning gears using the shifter and barrel adjuster.
Inflating tyres to the recommended pressure for safe riding.
Verifying brake function and checking for rubbing sounds.
Centering brake calipers for optimal disc rotor clearance.
Setting saddle height and tightening seat post bolts.
How to turn on the bike and navigate assist levels.
Recommended charging procedure for new batteries.
Ensuring pedals and bolts are tight before riding.
Steps to safely remove the battery using the key.
Correctly inserting and locking the battery into place.
Initial 12hr charging for the first three cycles.
Importance of keeping battery keys safe as replacements are unavailable.
Storing battery at 60% charge in a cool, dry place.
Battery and frame are water-resistant, not waterproof; handle plugs carefully.
Avoid charging in humid areas or outdoors to prevent electric shock.
Details on the 2-year battery warranty and what it covers.
High temperatures accelerate battery aging; avoid direct sunlight and hot cars.
Using assist modes judiciously; high levels increase current and battery wear.
Be aware of surroundings and maintain control on loose surfaces.
Mandatory helmet use in Australia and lighting recommendations.
Adherence to 250W and 25km/h limits; modifications void warranty.
Service bike every 4-6 months; avoid unauthorized modifications.
General| Brand | Lekker Bikes |
|---|---|
| Model | E-AMSTERDAM 2ND GEN |
| Category | Bicycle |
| Language | English |
To Next Page
