LEM .35 HP - Grinder Components and Specifications; Grinder Head Parts Identification; Grinder Plates, Tubes, and Accessories; Grinder Specifications

*Stung tube set sizes. #8 Grinder – 3/8", 1/2", 3/4", 1" (10mm., 15mm., 20mm. & 25mm.)
#12, #22, #32 Grinders – 3/8", 3/4", 1", 1-1/8"
(10mm., 20mm., 25mm. & 30mm.)
The LEM meat grinders are manufactured by Fabio Leonardi, Inc., to comply with
LEM Products specications. Leonardi is one of the oldest grinder manufacturers
in Italy. These grinders are equipped with a stainless steel housing for durability and
ease of cleaning. All units have a 110 volt, gear driven, permanently lubricated motor
and are equipped with a circuit breaker to prevent overloading or overheating. Standard
equipment for all grinders includes: long-lasting, stainless steel coarse and ne plates, a
stainless steel knife, a meat stomper, a large stainless steel pan, 4 stung tubes and a
stung plate. All models have a 2 year manufacturer’s warranty on parts and labor.
The LEM meat grinder will provide you with years of dependable, ecient service
if properly used and maintained. Keep your grinder parts clean and lubricated during
storage with a food grade silicone spray. (Available at LEM Products.)
GRINDER HEAD FOR .35 HP, .75 HP, 1 HP, 1.5 HP
6 7
Stainless Steel Grinder Plates
Catalog Grinder Plate Plate
Number Size Hole Diameter
343SS #8 1/8” 2-1/2”
344SS #8 3/16” 2-1/2”
473SS #8 1/4” 2-1/2”
345SS #8 3/8” 2-1/2”
474SS #8 1/2” 2-1/2”
347SS #10/12 1/8” 2-3/4”
046SS #10/12 3/16” 2-3/4”
475SS #10/12 1/4” 2-3/4”
047SS #10/12 3/8” 2-3/4”
476SS #10/12 1/2” 2-3/4”
348SS #20/22 1/8” 3-1/4”
049SS #20/22 3/16” 3-1/4”
477SS #20/22 1/4” 3-1/4”
050SS #20/22 3/8” 3-1/4”
478SS #20/22 1/2” 3-1/4”
479SS #20/22 3/4” 3-1/4”
376SS #32 1/8” 3-7/8”
052SS #32 3/16” 3-7/8”
481SS #32 1/4” 3-7/8”
053SS #32 3/8” 3-7/8”
482SS #32 1/2” 3-7/8”
483SS #32 3/4” 3-7/8”
LEM GRINDER REPLACEMENT PARTS & ACCESSORIES
2” Aluminum Stung Tubes
Catalog Number Grinder Size
609 #8
084 #12
085 #22
086 #32
Grinder Accessory Items
Catalog
Number Item
401 Tomato Squeezer Attachment
433A Cuber/Tenderizer Attachment
200 Ground Meat
A,B,C,D Packaging System
686 Grinder Cleaning Brush Set
648 Grinder Cover
.35HP & .75 HP
650 Grinder Cover
1HP & 1.5HP
Grinder Size Unit Weight Hourly Production Watts Volts
#8-.35 HP 29 lbs. 240 lbs. 261 110
#12-.75 HP 37 lbs. 360 lbs. 560 110
#22-1 HP 52 lbs. 550 lbs. 746 110
#32-1.5 HP 72 lbs. 720 lbs. 1119 110
GRINDER SPECIFICATIONS FOR .35 HP, .75 HP, 1 HP, 1.5 HP
LEM Products • West Chester, OH 45011 • PH: 1-877-536-7763 • www.lemproducts.comLEM Products • West Chester, OH 45011 • PH: 1-877-536-7763 • www.lemproducts.com
Ref. Description .35 HP .75 HP 1 HP 1.5 HP
TC 8 TC 12 TC 22 TC 32
1 Main Body / Head 0801 1201 2201 3201
2 Screw feeder drive 0802 1202 1202 1202
3 Screw feeder nylon bushing 0803 1203 1203 1203
4 Screw feeder/auger 0804 1204 2204 3204
5 Square auger stud 0805 1205 2205 3205
6 Knife 0806 1206 2206 3206
7 Grinding plate 3/16” holes 08074.5 12074.5 22074.5 32074.5
8 Retaining ring 0808 1208 2208 3208
9 Meat Pan 0809 1209 2209 3209
10 Stomper 0810 0810 0810 0810
11 Stung tube set* 0811 1211 2211 3211
12 Stung plate 0812 1212 2212 3212