LEM ANALYST 2060 User Manual

International Electrical Symbols
Caution! Refer to this manual before using the meter
Meter is protected by Reinforced or Double Insulation
CONTENTS PAGE
1 INTRODUCTION................................... 2
1.1 Instrument Features ............................ 3
2 SPECIFICATION................................... 4
2.1 Electrical Data..................................... 4
2.2 General Data....................................... 8
3 OPERATING INSTRUCTIONS.............. 10
3.1 Rotary Switch / Keypad Selections ...... 10
3.2 Voltage Measurement.......................... 11
3.3 Current Measurement.......................... 13
3.4 Watts /VA /PF /kWHr measurement .... 14
3.5 Watts 3Ø /VA /PF /kWHr measurement
15
3.6 Frequency / THD Measurement ........... 16
3.7 Set Up................................................. 17
3.8 Data Logging – Quick Start ................. 17
3.9 Data Logging – Advanced.................... 18
3.10 WinLog ............................................. 20
4 TECHNICAL DEFINITIONS................... 21
4.1 Measured parameters.......................... 21
4.2 Watts/VA/VAR/PF sign conventions .... 21
5 SAFETY................................................ 22
6 BATTERY REPLACEMENT.................. 23
7 WARRANTY ......................................... 24
8 OTHER PRODUCTS............................. 24
Issue 7 07/00

LEM ANALYST 2060 Specifications

General

Brand	LEM
Model	ANALYST 2060
Category	Analytical Instruments
Language	English

Summary

Introduction to the Analyst Instrument

Instrument Features Overview

Detailed list and illustration of the instrument's main operating features and controls.

Product Specifications

Electrical Data: Current Measurement

Specific electrical data for current measurement: ranges, resolution, accuracy, and harmonic analysis.

Electrical Data: Voltage Measurement

Specific electrical data for voltage measurement: ranges, resolution, accuracy, crest factor, and harmonics.

Electrical Data: Watts Measurement (Single and 3 Phase)

Electrical data for Watts measurement in single and three-phase systems: ranges, resolution, and accuracy.

Electrical Data: VA Measurement (Single and 3 Phase)

Electrical Data: VAR Measurement (Single and 3 Phase)

Electrical Data: Power Factor (Single and 3 Phase)

Electrical Data: Kilowatt Hour (kWHr)

Electrical Data: Frequency Measurement

Operating Instructions

Rotary Switch and Keypad Selections

Guide to selecting instrument functions using the rotary switch and keypad, detailing switch positions and button functions.

REC Mode Functionality

SAVE Mode Functionality

Voltage Measurement of RMS or DC Voltage

Procedure for performing RMS or DC voltage measurements, including safety and display options.

Current Measurement Procedure

Procedure for performing current measurements using the clamp-on jaws, including parameter selection and zeroing.

Single Phase Watts, VA, PF, kWHr Measurement

Procedure for measuring Watts, VA, PF, and kWHr in single-phase circuits.

3 Phase Watts, VA, PF, kWHr Measurement

Procedure for measuring Watts, VA, PF, and kWHr in balanced three-phase systems.

Frequency and THD Measurement

Procedure for measuring Frequency and Total Harmonic Distortion (THD) of voltage or current.

Data Logging: Quick Start Guide

Data Logging: Advanced Features

Data Logging: Send Data to PC

WinLog PC Software Overview

Safety Precautions

Battery Replacement Guide