LEM fx 12 - Page 8

8
fx 12
Connectors 2 x JACK 1/4" unbalanced
Input sensitivity
0 dBu / 0.775 Vrms
Max. input level +11 dBu
Impedance > 1 kOhms
Connectors 2 x JACK 1/4" unbalanced
Nominal output level
0 dBu
Max. output level +11 dBu
Impedance < 300 Ohms
A/D converters 20 bit
D/A converters 20 bit
Sampling frequency 32 kHz
Type of effects Hall, Room, Vocal, Plate, Stereo Delay, Mono Delay, Chorus, Flanger
Presets 256 - 16 effects x 16 variations
Controls
PRESETS & VARIATIONS selectors
MIX, INPUT & OUTPUT controls
LED PEAK & POWER ON
MUTE FOOTSWITCH connector
Frequency response 20 Hz - 20 kHz (dry)
Dynamic range 100 dB
Distortion (THD) 0.08% @ 1 kHz (dry)
Power supply AC/DC ADAPTER 12V / 300 mA
Dimensions 210 x 45 x 130 mm (WxHxD)
Weight 1 kg
Features
General Specifications
fx 12 • Technical Specifications
INPUT section
OUTPUT section
DSP section