LEM HURRICANE Series - Page 5

6
hurricane series
3. SUB + SATELLITE systems (see fi g. 4)
In the following table you can fi nd the suggested sub-
woofer + satellite setups for the HURRICANE series
loudspeaker systems, together with the type of power
amplifi er to be used to drive the whole system.
a) H350S + H150: suggested power amp
500+500W on 4 ohm
b) H350S + H200: suggested power amp
600+600W on 4 ohm
c) H400S + H200: suggested power amp
600+600W on 4 ohm
d) H400S + H300 8ohm: suggested power
amp 700+700W on 4 ohm
6. Connection panel (fi g. 3)
1. SPEAKON power input for the connection to the
power outputs of the amplifi er or the powered mixer
(INPUT). The SPEAKON connector wiring diagram
is printed on the enclosure connection panel.
2. SPEAKON power output for the linking of two
loudspeaker systems to the same amplifier or
powered mixer (LINK).
3. SPEAKON power output with high-pass crossover
filter for the connection of a satellite to the sub-
woofer (H350S and H400S only).
7. Technical Specifi cations
H150 H200 H300 H350 H500 H350S H400S
High
1.5" wide-dispersion
super-tweeter
1" driver with titanium
diaphragm
on EWT horn
Mid
8" midrange
Low
10" woofer 12" woofer 15" woofer 15" woofer 2 x 15" woofer 15" woofer 18" woofer
Power handling
(
EIA RS-426A
)
W continuous
W
p
ea
k
150
300
200
400
300
600
350
700
500
1000
350
700
400
800
Impedance
Ohms
8 8 4 / 8 4 / 8 4 4 4
Passive crossover
Hz
3,5 kHz
12/18dB/oct.
3,5 kHz
12/18 dB/oct.
3 kHz
12/18 dB/oct.
6kHz @ 12dB/oct.
600Hz
@
18dB/oct.
200hz@ 6dB/oct.
2.2khz
@
12/18dB/oct.
200Hz
6/6 dB/oct.
120 Hz
6/6 dB/oct.
Connections
Construction
Dimensions
mm (WxHxD)
340x460x285 390x508x325 455x580x405 455x790x405 485x1060x435 475x555x520 625x540x545
Weight
kg
14 17 23 29 40 29,5 38
Frequency
response
Hz (-10dB) 60-20k 55-20k 48-20k 38-25k 42-20k 38-300 32-200
Sensitivity
MAX SPL
Continuous
117dB 120dB 123dB 122dB 126dB 122dB 122dB
Dispersion
°
60x40 60x40 60x40 120x40 60x40
High-density poplar chipboard with scratch-resistant gark grey carpet - Metal grid - 1/2 handles - Speaker stand adapter
SYSTEM SPECIFICATIONS
1/2 x SPEAKON
HURRICANE SERIES • TECHNICAL SPECIFICATIONS
LOUDSPEAKER SPECIFICATIONS
Components
1" driver with EWT horn