Order Code
Description Order no.
UNILAP 100 E incl. carrying case A 1855 06111 AT, CH, GB
Contents:
1 cable (3-pole plug/3 safety plugs),
1 cable (3-pole plug/mains plug country specific),
3 alligator clips,
3 test tips,
1 cable (plug / test tip),
1 carrying belt,
2 belt securing devices,
1 earth stakes,
1 cable reel (50 m wire),
6 batteries,
1 battery compartment
Operating instructions in E, G or F
UNILAP 100 E as above
incl. RS 232 interface*) A 1855 06113 AT, CH, GB
Accessories
Barcode-reader A 6914 40300
Test probe with START and illumination function A 6914 06110
Accuset with quick-charging (1.5 Ah) A 6403 04111
PC software WinSAT 100 A 6899 00182
IrDA
®
adapter for PCs A 6412 07000
IrDA
®
printer HP Deskjet 340 CBi A 6413 06211 AT
3 alligator clips A 6009 17103
3 test tips A 6009 54300
Earth stake A 6045 10350
Cable reel with 25 m wire A 6045 05102
Cable reel with 50 m wire A 6045 05103
Measuring cable with mains plug A 6002 89136
Measuring cable with 3 safety plugs A 6002 09017
Demo case protective measures A 1899 06211
Carrying case A 6030 10101
Adapter RS 232-Centronics A 6045 00600
Mains plug adapter F (NFC61303) - AT (Schuko) A 6045 06112
Adapter for 3-phase outlets, 3 pcs. A 6009 17200
*) Option RS 232 interface can only be installed at one of our service partners.
LEM NORMA GmbH
Palmersstraße 2
A-2351 Wiener Neudorf
PHONE: +43(0)2236 691-0
FAX: +43(0)2236 63 080
E-mail: lno@lem.com
LEM UK LTD
Geneva Court, 1 Penketh Place, West Pimbo
Skelmersdale, Lancashire WN8 9QX
PHONE: 01695 - 720 777
FAX: 01695 - 507 04
E-mail: luk@lem.com
Printed in Austria.
Technical modifications reserved.
Publication A 99438 E (03.99 · 5 · GD)
LEM Instruments Inc.
23822 Hawthorne Boulevard #100
Torrance, CA 90505
PHONE: 1-310-373-0966
FAX: 1-310-373-9056
E-mail: liu@lem.com
Distributor
● Transfer of measured data from the test instrument to the PC
via RS232 or IrDA
®
(Important: At the moment, Windows
®
NT 4.0
does not support, IrDA
®
communications! For Windows
®
NT PCs,
UNILAP 100 XE an RS 232 interface is required)
● Archiving of the measured data – Maintenance management
● Data administration via SQL data base, Installation data,
measured data, customers, customer orders
● Test protocols with measured values and information on the
installation
The user can select between a standard test protocol, a new
internationally recognized form with inspection results, or export
of all data. The respective template is automatically loaded and
linked to the data contained in the tree structure.
The inspection results form was created in Microsoft Word,
providing for unlimited editing possibilities. Only the measurement
values entered by the user are write-protected.
● Very simple attribution of measured values to the
measuring objects by using a bar-code reader
● Strictly hierarchic structure:
Project
Customer (name)
Order number
Description of the installation
(tree, unlimited number of sub-levels)
Measuring objects with measured values
● Compatible with Microsoft
®
Office 97
- User-defined logging via MS-Word
®
.
- Direct access to WIN SAT data base via MS-ACCESS
®
.
To Previous Page
Loading...