What to do if Lemair XQB22-(AUS)22G does not operate completely?
If your Lemair Washer isn't operating, first ensure there is no power failure. Then, check that the plug is correctly inserted into the power socket and that the fuse hasn't burnt out. Also, verify that the power switch and the START / PAUSE button are pressed. Finally, confirm that the set water level has been reached.
Why is my Lemair XQB22-(AUS)22G Washer not spinning?
If your Lemair Washer isn't spinning, make sure the washer is placed on a level surface. Also, check that the clothes are evenly distributed inside the tub and that you haven't overloaded it. Finally, ensure that the lid is properly closed.
How to fix no water inlet in Lemair XQB22-(AUS)22G Washer?
If your Lemair Washer isn't taking in water, check if there's a water supply cut-off or low water pressure. Ensure the water inlet hose is properly connected and the tap is turned on. Also, inspect the filter net of the intake valve for any blockages from foreign materials.
What to do if Lemair Washer has abnormal drainage?
If your Lemair Washer is experiencing abnormal drainage, verify that the water drain hose isn't placed too high. Also, check that the end of the water drain hose isn't sealed in a pond. Finally, inspect the internal rubber seal ring of the drain valve for any dirt blockages.
Controls for turning power on/off and setting water level.
Guidelines for safe handling and placement of the power cord.
Warnings on flammable items, wet places, and children.
Steps for attaching the water inlet hose to the tap.
General| Type | Top Load Washer |
|---|---|
| Capacity | 2.2 kg |
| Energy Rating | 2 Stars |
| Water Rating | 3 Stars |
| Voltage | 220-240V |
| Frequency | 50 Hz |
| Weight | 19 kg |
| Wash Programs | Gentle, Quick, Soak, Spin, Wash |
To Next Page
