Need help?Do you have a question about the Lemania Energy GX5 Series and is the answer not in the manual?
General| Operating Temperature | -20°C to +50°C |
|---|---|
| Input Voltage | 100-240V AC |
| Output Voltage | 12V / 24V (auto-detect) |
| Output Current | 5A |
| Compatible Battery Types | Lead-acid (Wet, AGM, GEL), Lithium |
| Protection Features | Over-voltage, Short-circuit, Over-temperature, Reverse polarity |
Overview of GX Series chargers compatible with various 12V batteries, including LiFePO4.
Details on Power Supply, Recondition, and Test modes for charger functionality.
Read instructions, use compatible batteries, avoid reverse polarity, damp/flammable environments, and starting vehicles while connected.
Proper cable handling, storage, extension cable use, lead/acid hazards, and static discharge prevention.
Disconnect battery, ensure charger is off, check battery acid level, and use distilled water if needed.
Connect charger, select battery type, connect clamps, and press power to start charging.
Select recondition mode, connect clamps, press power; process restores battery condition.
Select supply mode, connect clamps; powers vehicle systems without battery.
Perform tests with charger disconnected from mains; check battery voltage and alternator function.
Details on display elements: battery types, voltage, percentage, current, time, and test results.
Illustrates charging stages from voltage detection to pulse for 2A operation.
Illustrates charging stages from voltage detection to float charge for higher amperages.
To Next Page
