LEMI 46102 - User Manual

ISTRUZIONI PER INSERIMENTO MECCANISMO DESTRO ANTA 450MM rev. 13/06/07 cod. IS46105
ISTRUCTION FOR THE RIGHT MECHANISM INSERTION DOOR 450MM
- 1 -
1
*
Ingombro minimo di utilizzo
Minimum dimensions needed
*Art.46102 46105 mm. 500
46105B 46112
46112B
*Art.46102C 46105C mm 455
46105CB 46112C
46112CB
A
Guida A
Slide A
Inserire la guida A nel vano e
fissare.
(Se avete acquistato
l’ ammortizzatore trasversale
seguire le relative istruzioni di
montaggio)
Put the slide A on the base
and fasten.
(If you bought the transverse
shock-absorber read the
respective instructions
B
C
Estrarre totalmente il telaio “C”
dal carrello “B”
Pull out the frame “C” from the
trolley “B”

Summary

Minimum Dimensions Needed

Slide A Installation

Process for fitting and securing the slide component.

Frame C Extraction

Instructions for removing the frame from its trolley.

Trolley B and Wheel Installation

Trolley B Placement

Guides on positioning the trolley onto the slide.

Wheel Alignment Check

Verification of wheel positioning relative to the sheet.

Initial Screw Fastening

Process for loosely tightening the screws.

Final Assembly and Checks

Position Check and Screw Tightening

Ensuring correct open/closed positions before final screw tightening.

Handle Attachment

Steps for screwing handles and hooking baskets.

LEMI 46102 Specifications

General

Brand	LEMI
Model	46102
Category	Indoor Furnishing
Language	English