To Next PageTo Next Page
Need help?Do you have a question about the LEMKEN Solitronic and is the answer not in the manual?
Describes the intended use of the Solitronic system with specific Solitair models.
Details the components and operation of the Solitronic control terminal.
Explains the various displays and menu options available on the control terminal.
Describes the function of each switch and button on the Solitronic control terminal.
Introduces the Entry menu and its general usage based on equipment configuration.
Details various functions and settings accessible within the Entry menu.
Explains how to set and confirm the cultivator working width for tramline configuration.
Describes how to select the field boundary side (left or right) for tramline rhythm.
Details how to select straight rhythm and passage types for tramline creation.
Explains the options for hectare counting, including tramline ducts.
Lists possible tramline rhythms based on working width and tramline system.
Describes the process for manually calibrating the wheel in mm/pulse.
Explains the serial interface connection between the control system and the GPS receiver.
Describes how to determine the seed rate reference value for GPS seeding.
Details how the system receives and displays seed rates from a GPS receiver.
Explains how to convert seed rate from grains/sq. m. to kg/ha.
The main procedure for calibrating the seed drill's seed metering.
The main procedure for calibrating the fertiliser metering.
Describes the various displays and their functions within the Operating menu.
Covers additional displays shown in the Operating menu during operation.
Details the initial set of functions and displays available in the first Operating menu.
Shows how to view the system's operating voltage and current usage.
Explains how to access and view the hectare counters.
Guides on manually starting the seeding process independently of the control system.
Details how to manually interrupt the seeding process.
Explains how to display the minimum and maximum permissible blower speeds.
Shows how to view the quantity of seed filled and spread.
Instructions on navigating to the second Operating menu.
Details the functions and displays of the second Operating menu.
Guides on adjusting the sowing quantity using percentage increments.
Explains how to activate and use section-width switch-off functionality.
Describes how to switch the current track forward or backward for tramline shifting.
Explains the operation of the S harrow in manual or automatic mode.
Details the functions and displays of the third Operating menu.
Provides general information on selecting modes and functions within the third Operating menu.
Explains the automatic operation of sequence control for various implement sections.
Details the manual operation mode for deactivating or activating implement sections.
Guides on deactivating or activating the Heliodor section in manual mode.
Explains how to deactivate or activate the coulter bar in manual mode.
Guides on deactivating track markers in manual mode.
Explains how to select the track marker folding method, automatic or manual.
Describes how to select which track markers (left, right, or both) are folded.
Introduces the purpose and usage of sowing pipe monitoring.
Explains how the sowing pipe monitoring system operates automatically.
Details the tramline monitoring function and its error reporting.
Describes spreader monitoring for detecting blockages in section widths.
Guides on diagnosing sowing pipe monitoring issues using error messages.
Explains the hardware test performed on the sowing pipe monitor upon system startup.
Describes how to perform a sensor test and interpret its results.
Guides on displaying the software versions for the control system and terminal.
Explains how faults are displayed as codes and where to find detailed descriptions.
Details functional faults and malfunctions found in Group A codes.
Covers line faults, open circuits, and short circuits found in Group B codes.
Directs users to Section 8.3 for sowing pipe monitoring diagnosis.
Explains how to view various seed drill settings like serial number and working width.
Guides on displaying configured seed/spread rates and speed ranges.
Instructs on accessing the pocket calculator feature.
Explains how codes are displayed for information, warnings, and malfunctions.
Provides a table of codes, descriptions, possible faults, and remedial measures for information.
Lists codes, descriptions, possible faults, and remedial measures for warnings.
Details codes, descriptions, possible faults, and remedial measures for malfunctions.
General| Brand | LEMKEN |
|---|---|
| Model | Solitronic |
| Category | Control Systems |
| Language | English |
