EasyManua.ls Logo

LENCO BAR-013 - Page 10

LENCO BAR-013
67 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
10
turn ON the alarm clock.
2. When ON show on the screen, press (6)” button to go to hour
set.
3. Press or pressing the (5)” or (7)” button for adjusting the hour
time as you desired.
4. Short press the (6)” button to confirm the hour time set and go for
Minute set. The number of minute will blink on LED display;
5. Press or pressing the (5)” or (7)” button for adjusting the
minute time as you desired.
6. Short press the (6)” button to confirm the minute time set.
7. When the alarm is set, it will emit a series of beeps and then adjust the
alarm volume.
8. Press or pressing the (5)” or (7)” button for adjusting the
volume level as you desired.
9. Short press the (6)” button to confirm the volume level and the
volume of alarm clock set is completed.
10. Press once (1) button to stop the alarm
J. Hand Free Function
1. When there is an incoming call during Bluetooth music playing mode;
2. The ringing sound will up and the playing music will pause
automatically.
3. Press (6)” button to pick up the call if you want.
4. Now you have hand-free function with the Bluetooth speaker.
5. Press (6)” button again to hang up the call when finished. And the
paused music will start to play automatically.
6. Press and hold (6)” button for 3 seconds to ignore the incoming
call.
Tip: speak to the “MIC (8)” hole direct with distance in 30 ~ 60cm to get
the best speaker phone performance when necessary.
K. Redial for Last Call Function
1. To redial for last called number by the Bluetooth Speaker, even it is in
music playing mode.
2. Press twice the (6)” button to enter into redial function, the
playing music will pause and switch to hand-free function for redial.
3. Press the (6)” button again to hang up the redial call.
4. Make sure that your mobile phone has have last dial call used, if not,
the redial for last call function cannot be activated.
L. FM Function
Manual Tune Radio Frequency:
1. Press the “M button (2)” to enter into FM mode.

Related product manuals