To Next PageTo Next Page
Need help?Do you have a question about the LENCO CR-3304 and is the answer not in the manual?
CD Section| channels | 2 channels |
|---|---|
| S/N ratio | 60 dB |
| sampling frequency | 44.1 kHz |
Radio Section| tuning ranges | FM 87.5 - 108 MHz |
|---|---|
| antennas | FM Wire Antenna |
General Specifications| output power | 1 W + 1 W (RMS) |
|---|---|
| power consumption | 12.5 W |
| speaker impedance | 8 OHM |
Power Source| AC power source | 230V ~ 50Hz |
|---|---|
| DC backup power source | 9V backup (1 x 006P) |
| remote sensor power | 3V, 2 x AAA/LR03 (1.5V) |
Weight and Dimensions| main unit dimensions | 245(L) x 207(D) x 104(H)mm |
|---|---|
| remote temperature sensor dimensions | 80(L) x 76(D) x 22(H)mm |
| weight | 1.37 kg |
Warning about the product containing a low power laser device and not to touch the lens.
Advice on placement, safety, AC voltage, and condensation for safe and appropriate operation.
Identification and labeling of all buttons and indicators on the main unit of the CD radio alarm clock.
Instructions for connecting to AC power, operating the unit, and positioning the FM antenna for reception.
Details on fitting backup batteries for clock settings and installing batteries in the remote temperature sensor.
