LENCO CR-620 - Page 18

18
Information
Value and and precision
Manufacturers name or trade mark,
commercial registration and address
Huazhaoxin Industrial Park B-4/F, Golden
Phoenix Industrial Zone, Fenggan Town,
Dongguan, Guangdong Province, People’s
Republic of China.
Model Identifier
OBL-0501000E
Input voltage
100-240V AC
Input AC frequency
50/60Hz
Output voltage
5.0V
Output current
1.0A
Output Power
5.0W
Average active efficiency
76.52% (230V, 50Hz)
Efficiency at low load (10%)
--
No load Power consumption
≤0.10W
IMPORTANT INFORMATION REGARDING DAB+ RECEPTION
DAB+ radio reception is different from FM radio reception.
• In FM, you can often still receive a weak station, but probably with a rustling or
crackling sound.
• DAB + reception works digitally and if there is not enough signal you hear
nothing. No hiss or crackle as with FM. This is not due to the radio, but to the fact
that there is not enough DAB+ signal at that location.
• DAB + rule is: no or weak reception = no sound.
What can you do if you do not have direct DAB+ reception.
• Always point the antenna straight up vertically first.
• Do not place the radio too close to potential sources of interference such as,
battery chargers, rotating machinery, computers, large metal surfaces, etc.