LENCO CR-620 - Trouble Shooting; Common Problems and Solutions; Specifications; Technical Details of the Device

17
20. Trouble Shooting
Problem:
FM Hiss/DAB burbling/intermittent cut-out/DAB No stations available
message
Cause:
Low signal strength
Solution:
Check/move antenna. Move radio. Rescan local (high-strength)
21. Error messages
‘Service not available’:
No DAB reception
‘Signal error’:
The DAB signal has been interrupted.
‘No DAB Station’:
The listed station cannot be found.
(No name.):
The current station does not broadcast an identity name.
‘No stations found’:
No DAB stations are available, check aerial.
‘No Radio Text’:
No RDS text information is available on this station.
‘No PTY’:
No RDS programme type information is available.
‘No Name’:
No RDS station name is being broadcast.
22. Specifications
Description:
Speaker
Frequency Range:
LCD Display:
DAB+/FM Digital Radio
1 x 1W rms
FM: 87.5-108MHz
DAB/DAB+: Band III 174.928-239.200MHz
2.8 inches color TFT display
Power Supply (Power adapter):
Input: 100-240V ~ 50/60Hz 0.3A max
Output: 5V 1000mA
Dimensions:
Working Temperature:
Manufacturer name of power adaptor:
Model number of power adaptor:
98mm x 110mm x 90mm
0-45°C
DongGuan Obelieve Electronic Co., Ltd
OBL-0501000E