LENCO DAR-015 User Manual

10
Dynamic Label Segment (DLS): Displays scrolling text information supplied by the broadcaster.
Signal Strength: Displays a signal bar with the current station strength.
Bit Error Rate (BER): Provides details of the signal error rate.
Channel Frequency: Displays the station’s transmission channel number and frequency.
Program Type (PTY): Shows the type and description of the program provided by the DAB station.
Time&Date: Displays the time and date information provided by the broadcaster.
Bit Rate: The date rate of which the signal is being transmitted.
Station information on FM mode
Every time you press the Info/Menu button in the FM mode, the display will cycle through the
following display modes:
Program type: Displays description of the program provided by the radio station.
Signal Strength: Displays a signal bar with the current station strength.
Time and Date: Displays the time and date information provided by the broadcaster.
Frequency: Displays the station’s transmission frequency.
Audio Type: Displays the audio type of the current station (Stereo or Mono).
Radio Text: Displays scrolling test information supplied by the broadcaster.
Note: To switch between mono and stereo by pressing the Enter button repeatedly.
Retuning your DAB+/FM Radio
You can retune your radio stations to store new stations or tune to a new region. Your preset stations
will remain stored when you perform a full scan retune. In DAB mode:
Press the Scan button to perform a full scan.
Progress will be indicated on the display.
When tuning is complete, the radio will play the first listed station or return to the last station played.
Using the Headphones
You can listen to your DAB/FM radio using headphones, just plug the 3.5mm jack into the back of your
device in the headphone jack. Control the volume by using the Volume knob.
Bluetooth
To choose your mode, press through your choices using the ‘Mode’ button. The choices will be
displayed on the front screen.
Turn on Bluetooth on your phone and ‘Lenco DAR-015’ will appear. Click on this to connect. When the
unit makes a short sound, it has successfully connected.
To choose music you will need to choose the album or playlist from your phone, but once selected you
can then use the Prev or Next button to select previous or next tracks.

LENCO DAR-015 Specifications

General

Radio type	Personal
Tuner type	Digital
PLL synthesizer	Yes
Supported radio bands	DAB, DAB+, FM, PLL
RMS rated power	10 W
Audio formats supported	AAC, MP3, WAV
Number of built-in speakers	2
Display type	TFT-LCD
Backlight color	Blue
Display diagonal	2.6 \
Display number of colors	Monochrome
Headphone outputs	1
Headphone connectivity	3.5 mm
Gross weight	1680 g
Docking station included	No
Apple docking compatibility	Not supported
Material	Wood
Coloration	Monochromatic
Power source	AC
AC input voltage	100-240 V
AC input frequency	50 - 60 Hz
Power consumption (typical)	18 W
Quantity per master (outer) case	4 pc(s)

Weight and Dimensions

Depth	116 mm
Width	310 mm
Height	126 mm
Weight	1550 g