To Next PageTo Next PageWhat to do if no stations are available in DAB mode on my LENCO KCR-004 DAB+ Radio?
If you are experiencing issues such as no stations, burbling, or intermittent signal in DAB mode on your LENCO Radio, try the following: 1. Move the radio. 2. Extend the wire antenna and position it vertically. 3. Rescan for local stations only (high-strength). 4. Check the local DAB coverage in your area.
How to fix no sound on my LENCO KCR-004 DAB+ Radio?
If your LENCO Radio has no sound, ensure that the sound is not muted and increase the volume.
What to do if the alarm does not work on my LENCO KCR-004 DAB+ Radio?
If the alarm on your LENCO Radio is not working, first ensure that the alarm is switched on. Also, check the volume settings, referring to the solutions for 'No sound'.
How to stop the hiss in FM mode on my LENCO KCR-004 DAB+?
If you are experiencing a hiss in FM mode on your LENCO Radio: 1. Check or move the FM antenna. 2. Move the radio to a different location. 3. Extend the wire antenna and try different directions.
What to do if my LENCO KCR-004 DAB+ Radio does not switch on?
If your LENCO Radio does not switch on, verify that the power adapter is properly connected to the power supply.
What to do if my LENCO Radio has any other undetermined cases?
For any other issues with your LENCO Radio, try switching it off and then switching it on again.
General| Radio Bands | DAB+, FM |
|---|---|
| Frequency Range (DAB+) | 174.928 - 239.200 MHz |
| Frequency Range (FM) | 87.5 - 108 MHz |
| Display | LCD |
| Audio Output | 3.5mm headphone jack |
| Weight | 0.4 kg |
| Preset Stations Quantity | 20 (10 DAB+, 10 FM) |
| Alarm Clock | Yes |
| Snooze Function | Yes |
| Colour | Black |
| Power Source | AC Adapter, Battery |
| Speaker Output | 1W |
Details the functions and layout of the remote control unit for operating the radio.
Instructions for physically installing the radio unit under a cabinet using provided hardware.
Steps to connect power, switch on the device, and the initial automatic DAB station scan.
Configure alarm settings including time, mode, type, and volume for wake-up calls.
Set the sleep timer to automatically turn off the radio after a specified duration.
Set a countdown timer with hours, minutes, and seconds, with a buzzer alert.
Manually set the clock time (hh:mm) and date (dd-mm-yyyy), with auto-update option.
Adjust the audio equalizer settings to various sound profiles like Pop, Rock, etc.
Control the brightness level of the device's display screen between High, Medium, Low.
Select the on-screen display language from available options like English, Deutsch, French.
Perform a factory reset to restore default settings and clear stored data like alarms and presets.
View the current firmware version of the system for reference.
