LENCO DFT-1010 - Page 9

9
! Preference
Change Pin
This option is to change pin.
Default
After choosing this option, all the settings will turn back to factory setting..
! Exit
Exit [Setup Menu].
Technical Parameters
Panel Size
10.1
inches
Resolution
800 x 3RGBx480
Screen Size Mode
16 : 9
Modulation format
QPSK,16
-QAM,64-QAM
Bandwidth
6,7or8MHz
Input Frequency
VHF 170
-230MHz,UHF 470-862MHz
Trans Mode
2k or 8k FFT
Power Requirement
DC 12V /
1.0A
Power Consumption
10
W
Speaker Output
1W x2
Note
Digital Reception is dependant on your area, please check coverage before
buying.
For more information and support visit
http://www.lenco.eu
If at any time in the future you should need to dispose of this product please
note that: Waste electrical products should not be disposed of with household waste.
Please recycle where facilities exist. Check with your Local Authority or retailer for
recycling advice. (Waste Electrical and Electronic Equipment Directive)