What to do if my LENCO LCD TV remote control is not responding?
If your LENCO LCD TV remote control isn't responding, the battery may be exhausted, so try changing it. Also, make sure the remote control is facing the set top box and is close enough to the unit; adjust its position and move closer.
Why does my LENCO LCD TV screen show 'No Signal'?
If your LENCO LCD TV screen displays 'No Signal', it could be due to a disconnected DVB-T cable. Ensure that the DVB-T cable is securely plugged in. Alternatively, the settings might be incorrect; try resetting them.
What to do if my LENCO LCD TV has only sound, but no image on the screen?
If your LENCO LCD TV has sound but no image, ensure the AV cable is correctly connected. Also, if the program is a radio program, press the < TV/RADIO > key to switch to TV mode.
Why does my LENCO LCD TV have no sound from the speaker?
If there is no sound from the speaker of your LENCO LCD TV, check the audio cable connection and connect it correctly if needed. Also, ensure that the mute function is turned off. If the issue persists, try another sound track.
What to do if the image on my LENCO LCD TV stopped suddenly or looks like a mosaic?
If the image on your LENCO LCD TV suddenly stops or appears as a mosaic, the signal might be too weak. Try to strengthen the signal.
General| Screen Type | TFT LCD |
|---|---|
| Aspect Ratio | 16:9 |
| Screen Size | 10 inches |
| Battery | Rechargeable lithium-ion |
| Connectors | USB, SD card |
| Power | AC 100-240V ~ 50/60Hz |
| Media playback | Yes |
| Supported formats | JPEG, MP3 |
To Next Page
