No.
Description
6
7
9
Buttons
8
10
Snooze
Sleep
Standby
Information
ID3
Alarm
Number buttons
Volume+/-
Next/Previous
Stop
Press to select 3 kinds of brightness of the display screen.
Press to set the sleep time: sleep off/10/15/30/45/60/90/120 minutes.
When the time out, the unit will enter sleep mode automatically.
Press to turn on the unit; or turn to standby mode.
11
12
13
14
15
16
17
In FM or DAB mode, press to check the information of the stations.
Press to adjust the volume to a comfortable level.
In BT mode, press to skip to next or previous track/song.
In FM mode, press to tune the frequency up or down by steps of
0.05MHz; long press to skip to the next or previous available frequency.
Press to stop playback, press to re-start.
While playing MP 3 tracks, press to display information
of current track: album, artist, etc.
Treble
Press Treble button and use the Volume+/- button to adjust the treble.
18
19
20
Press to play tracks in a random order, press again to
Random
MO/ST
In radio mode, press to switch stereo on if there’s strong reception.
If the reception is weak, you can not turn stereo on.
BT Pair
Press to activate the BT function of the unit to pairing status if
unpaired. In paired status, press to disconnect the devices.
Press Bass button and use Volume+/- buttons to adjust the bass.
Bass
Dim
In standby status, press to set the time and alarm 1, alarm 2.
Press once to enter Time setting status, press twice to enter Alarm 1
setting status. Press the third time to enter Alarm 2 setting status.
In Time or Alarm
When in time setting interface, the screen display the YYYY/MM/DD.
Use the to select the digits of the date, then press and then
select the 24/12 hour, next to set the Hour/Minute, press to finish.
When in alarm setting interface, the words “0:00" flash, press or
to select the digits of the alarm time, press to confirm. Then select
the alarm options: Daily, Weekdays, Weekends, Once. Next to select
the alarm mode: Buzzer mode, FM mode, USB mode,DAB mode. At last to set
Alarm volume level. When finish setting Alarm 1, you can set Alarm 2.
To cancel the alarm, press ALARM button, then select OFF to cancel.
setting status, use or to select contents, then
press to confirm, and the system automatically skip to the next
setting status.
/
cancel.
In standby status, press to enter time setting interface, it show Time Auto Update,
choose On to update the time automatically when it receives DAB station or FM
RDS signal.
7
enter the nap mode, the alarm will go on again 5 minutes later.
If the alarm is set to buzzer mode, when the alarm goes on, press Snooze to
In DAB or FM mode, long press the number buttons 0-9 to save 10
stations directly. To save more, please refer to operations on Page 9.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
