LENCO DVP-1210 - Page 7

9
STOP
When this button is pressed once, the unit records the stopped point, from where playback will resume
if PLAY ( ) is pressed after wards. But if STOP button is pressed again instead of PLAY ( ) button,
there will be no resume function.
10
MODE
Set LCD parameter (adjust brightness, contrast, and saturation).
11
VOL+
23
VOL-
Adjust volume.
12
Forward Skip
Go to next chapter/track.
For MP3, if want to go to desire track, need to press number button on R/C or ▲/▼ button to highlight
the track and then press “ENTER” button to play the desire track.
13
Reverse Skip
Go to previous chapter/track to the beginning.
For MP3, if want to go to desire track, need to press number button on R/C or ▲/▼ button to
highlight) the track and then press “ENTER” button to play the desire track.
14
BUTTON
Press BUTTON allow skipping ahead at 5-level speed (X2->X4->X8->X16->X32->PLAY); press PLAY
button return to normal playback.
15
BUTTON
Press BUTTON allow skipping back at 5-level speed (X2->X4->X8->X16->X32->PLAY), press PLAY
button return to normal playback.
16
STEP
Step the motion in DVD mode.
17
SEARCH
Go to time point, title or chapter you want in DVD Mode.
18
SUBTITLE
Press SUBTITLE repeatedly during playback to hear a different subtitle languages.
19
ANGLE
DVD: Press ANGLE will change the view angle, on DVDs that support this feature.
20
TITLE
Return to DVD title menu
21
ENTER
Confirms menu selection.
22
SETUP
Accesses or removes setup menu.
24
REPEAT
Press REPEAT during playback to select a desired repeat mode.
DVD: you can play select repeat chapter/title/off.
CD/VCD: you can select repeat single/all/off.
MP3: you can select repeat single/folder/off and random.
25
SLOW
Press SLOW button repeatedly to enter slow playback, and cycle between different speeds. The speeds
are 1/2, 1/4, 1/8, 1/16, and normal.