LENCO DVP-937 - Technical Specifications; Electrical and Output Specifications

4. Parameters and specifications
5. Battery Parameters
Battery Specifications：
Output：7.4V
Storage and work circumstances：
1. Storage circumstances Temperature Humidity
6 months
-20°C +45 C~ °
-20 C +65 C° ~ °
65+20%
65+20%
2.Work circumstances Temperature Humidity
Standard charge
Standard discharge
0 C +45 C° ~ °
-20 C +65 C° ~ °
65+20%
65+20%
1 week
9
Item
Standard requirement
Output
Electronical parameters
VIDEO OUT
AUDIO OUT
:1.2 Vrms (1 KHz, 0 dB)
Power requirements
Operating humidity
: AC 100-240 V , 50/60 Hz
: 5 % to 90 %
System
Laser
:Semiconductor laser, wavelength 650 nm
Signal system
: NTSC / PAL
Frequency
response
Signal-to-noise ratio
:More than 80 dB (ANALOG OUT connectors only)
Dynamic range
:More than 80 dB (DVD/CD)
Accessories
Note: Design and specifications are subject to change prior notice.
N
:Video/Audio cable,Remote control,
Stereo headphone,Rechargeable battery,
: 20Hz to 20 kHz(1dB)
Power consumption
: <10W
: 0.948kg
Dimensions (Approx.)
Weight (Approx.)
: 240(L)X186(W)X44(H)MM
Battery Charging
Connect the DVD player to the supplied power adaptor, the LED indicator will
be RED when the battery is charging and will turn into green when the battery
is full charged.