EasyManuals Logo

LENCO IR-2100 User Manual

LENCO IR-2100
23 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
7
Storing a radio station in a preset by the front remote control:
To store a preset, you must first be listening to the station that you would like to save,
then press STORE button. Then press the preset number you would like to save and
allow 2 seconds to store the station into the preset. The LCD will then show <Assigned
to preset #>.
Once you have saved a station to one of the presets, you can recall it by pressing RECALL button.
Then press the preset number you would like to recall and the radio will connect to your station that
you recalled.
Setting the CLOCK
Note: If you make a mistake at any point, press BACK button to go back to the previous
screen
1. Press the SELECT button.
2. Press Tune up or down until the display says<Configure>.
3. Press the SELECT button.
4. Press Tune up or down until the display says<Clock>.
5. Press the SELECT button.
6. Press Tune up or down until the display say<Set Time>.
7. Press the SELECT button
8. Press Tune up or down until the hour setting is correct, then press the SELECT button.
9. Press Tune up or down until the minute setting is correct, then press the SELECT button.
The display says Time Set with the new time shown beneath for 3 seconds, and then returns to the
radio station display.
< Configure >
< Clock >
< Set time >
Set time
00:00
Set time
05:08
Set time
05:12

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the LENCO IR-2100 and is the answer not in the manual?

LENCO IR-2100 Specifications

General IconGeneral
BrandLENCO
ModelIR-2100
CategoryRadio
LanguageEnglish

Related product manuals