7
Description
1. TURNTABLE PLATTER
The platter is equipped with a feltmat. This makes it easier to manipulate the record for
scratch performance. Place vinyl records centered on the turntable platter.
2. COUNTERWEIGHT
Adjustment creates the proper downward pressure of the stylus to the record. Attach now by
sliding the counterweight onto the rear of the tone arm.
3. STYLUS PRESSURE ADJUSTMENT SCALE
Adjust stylus cartridge’s pressure alignment.
4. ANTISKATING KNOB
This applies inward force to the tone arm so it doesn’t skip outward across the record due to
the centrifugal force of the record spinning.
5. TONEARM LIFTER
Control the up and down action of the tonearm.
6. HEADSHELL
Install cartridge here. During installation, attach the stylus protector to guard the stylus tip
from damage.
To Next Page
Loading...
Need help?
General
