B
Brian ShahAug 14, 2025
What to do if no sound is produced by my LENCO MDV-3?
- CChristopher BrownAug 14, 2025
If your LENCO Home Theater System isn't producing any sound, make sure that the mute mode is off and the volume is turned up.
What to do if no sound is produced by my LENCO MDV-3?
If your LENCO Home Theater System isn't producing any sound, make sure that the mute mode is off and the volume is turned up.
What to do if the picture distorts or is out of control on my LENCO Home Theater System?
If the picture on your LENCO Home Theater System distorts or is out of control, especially when playing scratched or defective discs, or if the unit is affected by a strong electromagnetic field, try turning off the power for a short time and then turning it back on. Using a quality disc can also help to resume normal operation. Note that using a disc that is usually detected may shorten the service life of the unit.
What to do if I forgot the parental grade control password on my LENCO MDV-3?
If you've forgotten the parental grade control password on your LENCO Home Theater System, use the super password.
Why I cannot operate my LENCO MDV-3 Home Theater System with the remote control?
If you're unable to operate your LENCO Home Theater System with the remote control, check the batteries and replace them if needed. Ensure you are within 6 meters of the DVD player and pointing the remote directly at the front panel.
What to do if my LENCO MDV-3 Home Theater System cannot play discs?
If your LENCO Home Theater System isn't playing discs, ensure the disc is placed on the tray with the label facing up. Make sure the discs are compatible with the player. If the player seems to be under protection, switch it off for a while and then back on. Also, check if a grade limitation is set and relieve it if necessary.
Why picture distortion or no color display on my LENCO MDV-3 Home Theater System?
If you are experiencing picture distortion or a lack of color display on your LENCO Home Theater System, it may be due to a mismatch between the TV system or video output of the player and your TV set. Try resetting the TV system.
What to do if no picture is produced or picture is produced asynchronously by my LENCO Home Theater System?
If your LENCO Home Theater System produces no picture or the picture is asynchronous, the video output setup might not match how the unit is connected to the TV. Please ensure the setup is correct.
Why play mode is different from what has been chosen in the SETUP MENU of my LENCO Home Theater System?
If the play mode on your LENCO Home Theater System differs from what you've selected in the SETUP MENU, it could be because the disc lacks the corresponding function codes. In such cases, some functions selected in the SETUP MENU may not work properly.
What to do if no disc menu is displayed on my LENCO MDV-3?
If no disc menu is displayed on your LENCO Home Theater System, verify that the disc contains a recorded menu.
General| Brand | LENCO |
|---|---|
| Model | MDV-3 |
| Category | Home Theater System |
| Video Output | Composite Video, S-Video |
| Remote Control | Yes |
| Weight | 3.5 kg |
| Disc Compatibility | DVD, CD |
