LENCO Pa-50 User Manual

Lights indicating CD audio input, USB/SD/MMC input, microphone volume, and reverberation.

Indicators for bass and treble range settings on the control panel.

USB/SD/MMC card input port and microphone input port.

Selects between CD or USB/SD/MMC audio sources via indicator lights.

Controls for navigating tracks (Prev/Next) and accessing menu settings.

Buttons for adjusting main volume, microphone volume, and tone controls.

Functions include audio input selection, reset, and mute.

Controls for playing, pausing, and navigating tracks (Prev/Next).

Controls to adjust microphone volume and reverberation levels up and down.

Buttons for adjusting treble, bass, and main volume up and down.

Diagram showing audio input, speaker output, and power supply connections.

Details on RMS power, impedance, frequency response, and other performance metrics.

Ensuring the correct AC voltage (220-240V/50Hz) power supply is used.

Recommendations for airiness, avoiding direct sun, heat, dust, and moisture.

Warning against opening the unit and advice to use experienced personnel for repairs.

Advice to remove the plug from the power supply when not in use for extended periods.