7
sound source.
Note: Presets have to be stored first before you can select a preset as
sound source.
● If you select “FM” as alarm tone, press the “Rotary button(07) ” to select
<last list
ened
>, <Preset1>, <Preset2>, <Preset3>, <Preset4>, <Preset5> as
sound source.
Note: Presets have to be stored first before you can select a preset as
sound source.
● After setting the alarm tone, you can set the alarm repeat. Rotate the
“Rotary button (07) ” or Press “ (03) ” or “ (04) ”button to choose
between Once, Daily, Weekdays or Weekends
Note: If you select Once you have to set the desired date.
Now you can set the alarm volume level.
● Rotate the “Rotary button (07) ” or Press “ (03)” or “ (04)” button
repeatedly to adjust the volume level
● Active the Alarm
After setting the volume, the word “ON (by AC only)” or “Alarm Off” will
flash.
Rotate the “Rotary button (07)” or Press “ (03)” or “ (04)” button
repeatedly to Turn On/Off Alarm 1.
Press the “Rotary button (07)” to confirm or Press the “MENU/INFO (02) ”
button to cancel the alarm settings.
You can repeat the above steps for setting Alarm 2.
When the alarm is triggered:
Press the “ /MODE” button to stop the alarm.
7.2.1. Snooze
● When the alarm is triggered, short press the “Rotary button(07)” to
snooze the alarm
To set the snooze time, short press the "Rotate button (07)" for 5 minutes at
a time (The overall snooze duration is 30 minutes).
● The snooze time will count down on the LED display.
● Press the “ /MODE” button to stop the alarm snooze.
7.3. Time setting
First enter the system menu, rotate the “Rotary button (07)” or Press“
(03)” or “ (04)”button to select the <Time> menu.
Short press “Rotary button (07)” to go into the menu which selects.
7.3.1. Set the Time/Date
● Rotate “Rotary button (07)” or Press“ (03)” or “ (04)”button
repeatedly to select <Set Time/Date> in the menu. Press “Rotary button
(07)” to set the time and Date.
● the hour digits will flash on the display.
Rotate the “Rotary button (07)” or Press “ (03) ” or “ (04) ”button
repeatedly to adjust the hour and press the “Rotary button (07) ” to
confirm the hours then set the minutes.
● The minute digits will flash on the display, Rotate the “Rotary button (07)”
or Press the“ (03)” or “ (04)”button repeatedly to adjust the minute
and press “Rotary button (07)” to confirm the minutes. Now set the
AM/PM indication date. (if selected 12 hours format)
● The AM/PM will flash on the display, Rotate the “Rotary button (07)” or
Press“ (03) ” or “ (04) ”button repeatedly to select AM or PM and
press the “Rotary button (07) ” to confirm the settings. Now set the date.
● The date digits will flash on the display, Rotate the “Rotary button (07)” or
Press “ (03)” or “ (04)”button repeatedly to adjust the date and
press the “Rotary button (07)” to confirm the settings. Now set the
Month
● The month digits will flash on the display, rotate the “Rotary button (07)”
or Press “ (03)” or “ (04)”button repeatedly to adjust the month
and press the “Rotary button (07)” to confirm the settings. Now set the
year.
● The year digits will flash on the display, rotate the “Rotary button (07)” or
Press “ (03)” or “ (04)”button repeatedly to adjust the year and
press the “Rotary button (07)” to confirm the settings, then the display
will show “Time Saved”.
● If you do not want to save the settings, press the “MENU/INFO (02)”
button to cancel the settings, the display will show “Time Not Saved”.
7.3.2. Setting the date format
● Rotate the “Rotary button (07)” or Press “ (03) ” or “ (04) ”button
to select the <Set date format> from the menu, Press the “Rotary button
(07) ” to enter the date format sub-menu.
● Rotate the “Rotary button (07)” or Press “ (03)” or “ (04)”button to
select the desired format, it has 2 format for select, MM-DD-YYYY and
DD-MM-YYYY, Press the “Rotary button (07)” to confirm the selection.
● If you do not want to save the settings, press the “MENU/INFO (02)”
button to cancel the settings.
Note: the current setting is marked with a “*”
7.3.3. Setting 12/24 Hour format
● Rotate the “Rotary button (07)” or Press “ (03)” or “ (04) ”button to
select <Set 12/24 hour> from the menu. Press the “Rotary button (07)” to
enter the time format sub-menu.
● Rotate the “Rotary button (07)” or Press “ (03)” or “ (04)”button to
select the desired format (12-hour format/24-hour format) and Press the
“Rotary button (07) ” to confirm the selection.
● If you do not want to save the settings, press the “MENU/INFO (02) ”
button to cancel the settings.
7.3.4. Auto Update
● Rotate the “Rotary button (07)” or Press “ (03) ” or “ (04) ”button
to select <Auto update> from the menu, Press the “Rotary button (07) ”
To Next Page
Loading...
