LENCO PDR-065 - Page 12

12
D. Easy – Normal mode switch
This system has built-in easy-normal mode switch at the rear panel. Switch on Easy Mode to simplify the
interface of the device, making it easy to use for seniors.
Slide the Easy- Normal mode switch to the Easy mode position – Only Power On/Off (3), Preset 1 – 4 buttons
(12 – 15), and Volume knob (5) are still in operation. Other buttons will be cut-off.
Information
Notes
Manufacturers
name or trade
mark, commercial
registration and
address
-
Shenzhen ABP Technology Co. Ltd.
Address: 2
nd
floor, B2 Building, Xin hao sheng
Industrial zone, Yonghe Road, Qiaotou, Fuhai Street,
Bao an District, Shenzhen City, Guangdong 518103,
P.R. China
Model Identifier
-
AD0181-0552500GB
Input voltage
Specified by the
manufacturer. Shall be a
value or a range.
100-240V
Input AC frequency
Specified by the
manufacturer. Shall be a
value or a range
50/60 Hz
Output voltage
Nameplate output
voltage. Shall indicate
whether is AC or DC.
5,5V
Output current
Nameplate output
current.
2,5A
Output Power
Nameplate output power.
13,75W
Average active
efficiency
Declared by the
manufacturer based on
the value calculated as
arithmetical mean of
efficiency at load
conditions 1-4.
87,403%