20
4.
5.
Actual PRESS and HOLD RDS/PLAY buon has FM auto search and store funcon.
Icon The blinking clock on the RDS symbol means that Th is automa cally updated eac it
blinks.
1. Press the FUNCTION bu
n un l display Show USB.
2. Press PLAY to pause the playback, press it again to resume playback.
3. Using the bu
ons SKIP+/SKIP- to select next or previous track.
4. Press and hold SKIP+/SKIP- to
d/backward. When released normal playback will resume.
Programming
The device allow you to create a playlist of up to 20 tracks.
1. When USB playback is stopped press the MEMORY/ALARM b
. The display memory n flashes P01
2. When the playback stops, press the bu n Memory, The display flashes memory and P01 Appears.
3. Use the SKIP+/SKIP- bu
ns to selec desired track.
4. Press the MEMORY/ALAR n to store the selected track on the current n. The display will show P02.
5. You can create a program of up to 20 tracks by repea
ng steps 3 and 4.
6. Press the RDS/PLAY bu
n to start playback programmed list
NOTE:
- Compa
ble storage device (up to 32GB).
- Please do NOT use a USB extension cable to connect your USB flash drive. Such cable can pick up addi
nal
interference which can corrup
data flow.
- Due to some USB drive manufacturer’s non-compliance with the full USB 1.1/2.0 standard. A small
percentage (about 5%) of US
B flash drive might not be
e
11. AUX IN
This allows you to connect an external player’s sound through your unit.
1. Plug a 3.5mm audio cable (
cluded) into your external player’s line out and the other end into the AUX
IN Jack a
e right o e unit.
2. The unit will automa
ally enter AUX mode.
3. Start your external player to play music, The unit will outpu
sound. Note: when no sound can be heard,
check the volume level
oth units.
4. To return to another mode,
e audio cable from the unit
12. ENERGY SAVING
Due to ErP stage two requirement and p
nv ironment, the unit will switch to the standby mode
Au
cally once no music has been playing
over 15 minutes.
10. USING AN USB STICK PLAY
To Next Page
Loading...
