LENCO SCD-100 User Manual

10
To replace a new battery, please refer to the figure shown below. When inserting a battery, be sure to do so in the proper direction.
 If the remote control conflicts with other devices, the operation will be affected.
 Do not simultaneously press buttons on the unit and the remote control.
 Avoid using two remote controls at the same time as it will cause a malfunction.
 Use only CR-2025 size batteries.
 If there is battery leakage, clean the remote control thoroughly before replacing batteries.
 Do not short two terminals of the batteries. Dispose old batteries in a suitable place.

LENCO SCD-100 Specifications

General

Brand	LENCO
Model	SCD-100
Category	Radio
Language	English