Lennox Hearth Products BLOWER KIT

To Next Page

NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.

BLOWER KITS

COUNTRY COLLECTION™ WOOD FIREPLACE INSERTS

P/N 506033-36

Rev. NC, 11/2009

HEARTH PRODUCTS

KITS AND ACCESSORIES

KIT CONTENTS

1 ea. Blower Assembly

1 ea. Instruction Sheet

TOOLS NEEDED

5/32 Allen Wrench Or T Handle Wrench

9/16” Socket Wrench

9/16” Open End Wrench

5/16” Open End Wrench

Large Flat Head Screwdriver

FPO

INSTALLATION INSTRUCTIONS FOR INSTALLING BLOWER

KITS FOR USE WITH COUNTRY COLLECTION™ MODELS E260, C260, C310,

C160, CA160, C210 AND CA210 WOOD FIREPLACE INSERTS

WARNINGS

The blower must be plugged directly into a properly

grounded three-prong receptacle, 120 VAC, 60 Hz, single

phase. Do not cut or remove the grounding prong from

this plug. Do not route power cord under or in front of

appliance.

Installation must be in accordance with National Elec-

trical Code, ANSI/NFPA 70 - latest edition. In Canada,

the current CSA C22-1 Canadian Electrical Code - latest

edition.

DANGER: Disconnect power before servicing blower.

Figure 1 - Kit Contents

GENERAL INFORMATION

This optional blower kit can be installed to improve hot air distribution

throughout the room.

The room air circulation blower kit comes with a

variable speed control (rheostat) and an snap switch which will provide

automatic thermal activation of the blower, when desired (see Blower

Operation on Page 4).

If you encounter any problems, need clariﬁcation of these instructions or

are not qualiﬁed to properly install this kit, contact your local distributor

or dealer.

Read this instruction sheet in its entirety before beginning the installa-

tion.

ALL WARNINGS AND PRECAUTIONS IN THE INSTALLATION AND

OPERATION MANUAL PROVIDED WITH THE APPLIANCE APPLY TO

THESE INSTRUCTIONS.

SHUT DOWN THE INSERT AND ALLOW IT TO COMPLETELY COOL

BEFORE PROCEEDING.

BLOWER KITS FOR MODELS E260, C260, AND C310

H7912

WLINS-BLWR-B-SS Blower Insert Black

H7913

WLINS-BLWR-G-SS Blower Insert Gold

H7914

WLINS-BLWR-N-SS Blower Insert Nickle

H7915

WLINS-BLWR-BN-SS Blower Insert Brushed Nickle

H7916

WLINS-BLWR-BG-SS Blower Insert Brushed Gold

BLOWER KITS FOR MODELS C160, CA160, C210 AND CA210

Cat. No. Model Description

H7907

WSINS-BLWR-B-SS Blower Insert Black

H7908

WSINS-BLWR-G-SS Blower Insert Gold

H7909

WSINS-BLWR-N-SS Blower Insert Nickle

H7910

WSINS-BLWR-BN-SS Blower Insert Brushed Nickel

H7911

WSINS-BLWR-BG-SS Blower Insert Brushed Gold

Need help?

Do you have a question about the Lennox Hearth Products BLOWER KIT and is the answer not in the manual?

Summary

General Information

Kit Contents

Lists the items included in the blower kit for installation.

Tools Needed

Lists the tools required for installing the blower kit.

Installation Instructions

Install Blower Assembly

Step-by-step guide for physically installing the blower assembly into the fireplace insert.

Instructions for Model E260 Only

Specific installation steps for the E260 model, involving draft rod adjustments.

Blower Operation

Manual Operation

Explains how to operate the blower manually using the speed control knob.

Auto Operation

Details automatic operation where the blower responds to fireplace temperature changes.

Rheostat Operation

Describes how to adjust blower speed using the rheostat knob.

Blower Operation Guidelines

Provides advice on optimal blower speed settings for different fire intensities.