DC-DM-ROOFTOP-IOM-1801-E - 13 -
2.1.2 How to Start Unit ?
Press ‘Prg’ to activate the setup menu
If necessary, press several times ‘Up’ or ‘Down’ to blacken the icon
Press ‘Enter’ to confirm your choice
Press ‘Up’ or ‘Down’ to change the state ‘Off’ to ‘On’
Press ‘Enter’ to confirm your choice
Press ‘Esc’ to return to the main screen
The units can not be powered On/Off by the DM if the service display DS is connected.
2.1.3
How to See the Value of the Current Setpoint Temperature ?
Press ‘Prg’ to activate the setup menu
If necessary, press several times ‘Up’ or ‘Down’ to blacken the icon
The value displayed is the temperature setpoint.
Press ‘Esc’ to return to the main screen
To Next Page
Loading...
