Need help?Do you have a question about the Lennox e-Lite LV-MO200 and is the answer not in the manual?
Essential safety guidelines and warnings to be followed before and during installation.
Verification list of supplied fittings and accessories for installation.
Specifies suitable and unsuitable locations for outdoor unit installation.
Details required clearances and spacing for outdoor unit installation.
Provides guidance on lifting, moving, and securing the outdoor unit.
Explains the procedure for centralized drainage installation for the outdoor unit.
Covers precautions and procedures for refrigerant piping installation.
Describes methods for detecting refrigerant leaks after installation.
Details the importance and method of heat insulation for refrigerant pipes.
Details various methods for connecting indoor and outdoor units.
Guides on verifying correct pipe diameters for system connections.
Instructions to ensure piping is free from contaminants before connection.
Explains the procedure for testing piping system for leaks using nitrogen.
Describes the process of removing air from the refrigerant circuit using a vacuum pump.
Details how to calculate and add the correct amount of refrigerant.
Outlines the wiring connections for the outdoor unit.
Provides instructions for wiring the indoor units to the system.
Details the steps for performing the initial test run of the installed system.
Covers safety measures and information regarding refrigerant leakage.
Presents technical specifications for the air-to-air conditioner in cooling mode.
To Next Page
General
