13
Cooling mode:
Information requirements for air-to-air conditioners
8.1 Information requirements for air-to-air conditioners
Power consumption in modes other than "active mode"
Other items
Model(s): LV-MO200-I4M
Test matching indoor units from 2, non-duct: 2×LV-C4(C)45-2DC + 2×LV-C4(C)56-2DC
Outdoor side heat exchanger of air conditioner:air
Indoor side heat exchanger of air conditioner:air
Type:compressor driven
If applicable:driver of compressor:electric motor
Tj=+35℃
Tj=+30℃
Tj=+25℃
Tj=+20℃
Tj=+35℃
Tj=+30℃
Tj=+25℃
Tj=+20℃
EER
d
EERd
EER
d
EERd
2.23
4.28
7.34
10.51
-
-
-
-
20.000
13.554
8.951
7.218
kW
kW
kW
kW
Item Symbol Value UnitItem
Rated cooling
capacity
Degradation co-efficient
for air conditioners(*)
Declared cooling capacity for part load at given outdoor
temperatures Tj and indoor 27/19℃ (dry/wet bulb)
Declared energy efficiency ratio or gas utilisation efficiency/auxiliary
energy factor for part load at given outdoor temperatures Tj
P
rated,c
P
dc
P
dc
P
dc
P
dc
C
dc
0.25 -
20 kW
Seasonal space cooling
energy efficiency
η
s,c
219.8
%
Symbol Value Unit
Off mode
Thermosat-off
mode
Crankcase heater
mode
Standby mode
0.040
0.040
kW
kW
0.040
0
kW
kW
P
OFF
P
CK
P
SB
P
TO
Capacity control
Contact details
(*)If C
dc is not determined by measurement then the default degradation coefficient of heat pumps shall be 0.25
Where information relates to multi-split air conditioners,the test result and performance data may be obtained on the basis of
performance of the outdoor unit ,with a combination of indoor unit(s) recommended by the manufacturer or importer
Sound power
level,outdoor
GWP of the
refrigerant
For air-to-air air
conditioner:air
flow rate,outdoor
measured
9800- m
3
/h
variable
76
2088
dB
kg CO
2 eq
(100years)
L
WA