Heat pump Model
Cooling Model
Room Temp. ≥ 24°C21°C ≤ Room Temp. < 24°C Room Temp. < 21°C
Operating mode Cooling Cooling Healthy Dehumidification Heating
Indoor FAN Speed
High High High High
Setting Temperature
22°C22°C23°C24°C
ON/OFF OPERATION
Operation procedures when the remote control can't be used.
ON/OFF operation starts when this button is pressed, which is
located on the right side of the indoor unit and stops when you
press the button again.
Upon starting the ON/OFF operation, the operating conditions
are automatically set as Table 1, and the initial mode continues
during this operation.
Tact Switch Operation(Some Models)
Auto restart
In case the power comes on again after a power failure, Auto Restarting Operation is the function to
operate procedures automatically to the previous operating condition.
To Next Page
Loading...