94
Installation and Maintenance
Service Manual
Remove the nut xing axial ow blade and
then remove the axial ow blade.
Screw
Remove the screws xing left side plate
and then remove the letf side plate.
6.
Remove lef side plate
Procedure
Step
Nut
Axial ow blade
7.Remove axial ow blade
8.Remove electric box assy
Remove the screws xing electric box
assy ; pull out each wiring terminal; lift the
electric box assy upwards to remove it.
Note:
When pulling out the wiring terminal, pay
attention to loose the clasp and don’t pull
it so hard.
Screw
Electric box
assy
Left side plate
To Next Page
Loading...
